Window Caulking Replacement for Parkland Estate Homes.

Types of Window Leak Repair Services, Provided in Parkland and Other South Florida Locations.

The window perimeter sealant, connecting the stucco to the window frame is a very important sealant line. The sealant’s main goal is to connect (2) opposing surfaces together to keep rain out. The window frame material is quite different compared to a stucco or brick surface area.  Both materials contract and contract at different ratios. The caulking material has to adhere to both of these dis-similar surfaces and allow for both of them to expand or contract without losing it’s surface bond.

“We only use professional grade window caulking that have a successful track record and also have a long history of success. Parkland {title2) have contacted us to repair window leaks after several window companies and window leak repair companies have failed. We believe that the method to successfully repair window leaks, is knowledge of the problem, using professional grade waterproofing materials, experience consisting of many decades encountering and successfully repairing all types of window leaks. From inspection of the leak to repairing the issue, We are  Parkland’s Premiere Window Leak Caulking Replacement Professional Contractors.

Sealing Window Frame or Perimeter Caulking to Stucco – This seems to be the most vulnerable sealant line to continually montor. On a brand new window that is being installed, hardly ever is it the window itself, the cause of the window leak. If the window installer is using “consumer grade” sealant materials, then the window will not be caulked as good as if the best quality materials were not used. Common mistakes when hiring a contractor or a contractor that does not focus their efforts on window leaks alone.

Sealing Glass Leaks – These are leaks where water is actually getting in, between the frame and the glass it is sealed to. These are called “Glass Leaks”.  This is common when the window and door manufacturers used cheaper glazing silicone caulking, not enough sealant or a two sided glazing tape. National manufacturers used G.E , Pecora, Novoflex and other silicone formulations in the 1990’s. The new professional grade glazing formulations are far more superior to the earlier technologies. Dow Corning sealants are the industry’s gold standard. Glass leaks can be repaired without having to take the glass out of the frame. The glass perimeter can be cap beaded to keep water from getting into the window system.  Two sided glazing tape was used by manufacturers in place of a bead of silicone for glass installation into the window glazing pocketsash}. This was a cost cutting alternative to using window caulking silicone sealant since the sticky foam tape was much less expensive. The problem with the tape was it’s short lifespan. After 8-15 years the foam tape would dry up and turn into a dusty powder. The two sided tape that had degraded so bad, allows the rain water to effortlessly leak into the sash or frame, and ultimately into your home. Glass leak repair is done by sealing the perimeter of the glass to the frame to seal small gaps.

Other Types of Window Caulking We Perform in Parkland.

Sealing Storefront Frame Leaks – Storefront windows are not only used in commercial applications, but also in residential estate homes that wanted large sizes of glass without horizontal or vertical mullions. There are mainly 2 types of glazing methods on storefront window systems. “Wet Glazed” using silicone sealant, or “Dry Glazed” using rubber compression gasketing. Both have advantages and dis-advantages for each type. Wet glazed systems seem to last longer and have fewer leaks, but cost more to produce. Dry glazed systems are less expensive, but the rubber glazing gasketing will shrink and leak. This can be caused by direct sunlight on the storefront glazing gasket, or improperly installed from day one. If the installer stretched the gasketing while pushing it in, it will retract and shrink in a few years. Gasketing should be replaced if there are gaps where water can enter the window system.

Sealing Window Frame Joints – All windows that are fabricated out of aluminum will have mechanical frame joints. these joints are where a side jamb frame part is joined to a top or bottom frame parts. when the window is being made, the factory uses a small gap sealer at this joint. This sealant melts away after several years and leaves a visible gap in it’s absence. Corner gaps in the window frame bottom can be the culprit of a hard to find window frame leak. The area to be bonded should be cleaned thoroughly before applying new small gap sealer to fill this gap and resolve the leaking window.

Caulking Window Frame Mullions – Mullions are where 2 or more windows are joined together in one window opening. Window mullions caulking is just as important as the perimeter window caulking. Caulking or sealant that is missing in this location, will allow rain water to leak in between the mulled windows. An example of a mulled unit is a transom window over a French door or a large window stack that is 2 or more windows high or wide. You will usually see the water damage from the leak on the frame casing, baseboard or flooring. These must be repaired immediately so the wood window frame or flooring does not start to rot. 

Sealing French Door and Sidelight Sill Bottoms – When French doors are installed, they should be embedded into a bed of sealant to bond the sill bottom to the masonry opening. Perimeter caulking is applied to the exterior to keep water from creeping under the frame sill. If an installer does not install the door in a bed of sealant, there is nothing preventing rain water from sliding in under the entire door. Second floor installations should only be installed if a “Pan” is present and installed in the opening prior to the door being installed. We have developed a non-invasive door and window caulking procedure to resolve this in the event that the door installer has installed the door without a pan or sealant embedment. We push a waterproofing foam material under the frame sill to fill any voids, block water infiltration and to bond the frame sill to the door opening.

Sealing Sliding Glass Door Frames – Sliding glass doors are installed with much of the same considerations as the French doors listed above. We have had great window caulking success using the same repair methods as we use on leaking French doors. The sill anchors are sealed with small gap sealer, the water leg rise wall and the frame joints are sealed with small gap sealer as well. Once we have this completed, we drill a few access holes in the side frame, and push the foam sealant material under and aside of the sliding glass door frame. This works well as a second line of defense than just topical frame / jamb sealant alone.

Replacing Window Caulking on Frames – Window frame caulking will allow water to enter your home and case major damage inside the walls, the flooring, wood trim, drywall and carpeting. When water gets into these areas, you may not notice any damage until it has been leaking for a while. Wood rot and mold can grow rapidly if left unchecked or repaired immediately. Interior latex caulking will show cracks or gaps if there is unwanted moisture. Drywall will dis-color where the water leak point of interior entry.

Replacing Door Frame Weather Stripping – Weather stripping is a very important component when it comes to operable windows and doors. It’s sole purpose is to seal the gap between two surfaces to block out air and water. The weather stripping usually is compressed between the surfaces and fills the gap in between them. When the seal is bad, the performance of this component fails to seal the two areas to block air and water. Signs of failing weather stripping are if the hollow bulb has collapsed and no longer has a spring back action. PGT casement weather stripping will be black and gooey like caulking. Foam filled seals dry out and turn to powder or the casing surface is cracked and brittle. In the event that the weather stripping is in one or more of these conditions, it should be replaced.

Casement and Fixed Window Caulking in Parkland.

Caulking Fixed Picture Windows – There are two types of fixed windows. The first one is called a “Direct Set”. This window frame type is just that, the glass is glazed directly on the window frame itself. The 2nd kind is called “Sash in Frame”. This looks like an operable casement window, only the difference is that is is fixed. Sash in frame units should be sealed between the frame and the sash to keep water out. This should be done with a premium grade silicone, bonding the surfaces together. In the event water gets behind the sash, it will damage the frame and other interior components. If this sealant line is cracked or missing altogether, It should be applied. Just relying on the frame weather stripping is not enough to keep water out.

If you are a Parkland property manager or resident, and need window caulking and need assistance, do the following if it applies to you.

1. Cover the area from the outside with plastic.
2. Look for any holes or crack where water can come in.
3. Apply ANY exterior caulking to the hole to plug the leak for now.  Small amounts only on holes.
4. Keep an eye on it during rain.
5. Call an experienced window leak repair company.
6. Have an observation to determine if the leak is in fact a window leak only.
7. Make sure the leak is not coming in from the roof or above the window itself.
8. Hire only competent licensed contractors to do the work.
9. Make sure the work and materials are warranted for at least (1) year.
10. Inspect the quality of the work afterwards. It should look like a professional performed the work.

If you would like us to look at your project, Please fill out this Information sheet for us to know more about your needed service. 

What all City Residents should take away from this article.

What every Parkland resident should take away from this article

Water infiltration from perimeter caulking failure can lead to significant damage to interior wall surfaces, causing a range of issues such as water damage, mold growth, and algae formation. When window caulking fails, it allows water to seep into the building envelope, leading to various problems.

One common consequence of water infiltration is the formation of spider cracks on the affected walls. These cracks not only compromise the structural integrity but also provide pathways for further water penetration. As trapped water accumulates within the wall cavity, it can lead to stagnation and saturation of stucco or other exterior finishes.

The presence of excess moisture within the wall system can result in wet drywall and interior water stains. This not only affects the aesthetics of the space but also poses health risks due to potential mold growth. Mold thrives in damp environments and can cause respiratory issues and allergies among occupants.

Additionally, stagnant water within walls creates an ideal breeding ground for algae formation. The presence of algae not only detracts from the appearance of interior surfaces but also indicates ongoing moisture-related issues that need immediate attention.

To mitigate these problems, it is crucial to address perimeter caulking failures promptly. Regular inspection and maintenance of window caulking are essential to prevent water infiltration and subsequent damage. Timely repairs or recaulking can help maintain a watertight seal around windows and prevent further complications associated with water damage.

In conclusion, understanding the consequences of perimeter caulking failure and its impact on interior wall surfaces is vital in preventing costly repairs and ensuring a healthy living environment. Regular maintenance, prompt repairs, and addressing any signs of water infiltration are key steps in safeguarding against issues such as mold growth, algae formation, trapped water stagnation, stucco saturation, wet drywall, and interior water stains caused by inadequate window caulking.

—

When the perimeter caulking around windows fails, it can lead to water infiltration and cause significant damage to interior wall surfaces. This can manifest in various ways, such as spider cracks, wet drywall, interior water stains, mold growth, and algae formation.

The failure of window caulking allows water to seep into the walls, resulting in trapped water and stagnation. Over time, this trapped moisture can saturate stucco surfaces and penetrate through to the interior walls.

Water damage from perimeter caulking failure not only affects the aesthetics of the walls but also poses potential health risks due to mold growth. Mold thrives in damp environments and can lead to respiratory issues and other health problems if left untreated.

To prevent such issues, it is crucial to regularly inspect and maintain window caulking. Promptly addressing any signs of deterioration or water infiltration is essential to avoid costly repairs down the line. Regular maintenance can help identify areas that require re-caulking or other necessary repairs before extensive damage occurs.

In conclusion, ensuring proper window caulking is vital in preventing water damage to interior wall surfaces. Regular inspections and maintenance can help mitigate the risks associated with water infiltration, including mold growth and structural deterioration.

—

Water infiltration from perimeter caulking failure can lead to significant damage to interior wall surfaces, causing a range of issues such as water damage, mold growth, and algae formation. When window caulking fails, it allows water to seep into the walls, leading to various problems.

One common consequence of water infiltration is the formation of spider cracks on the affected walls. These cracks can allow more water to penetrate the surface and exacerbate the damage. As trapped water accumulates within the walls, it can lead to stagnation and saturation of stucco or other exterior wall materials.

Over time, this trapped moisture can seep through to the interior side of the wall, resulting in wet drywall and visible signs of water damage such as interior water stains. The presence of moisture also creates a favorable environment for mold growth, which not only poses health risks but also causes further deterioration of the affected areas.

Additionally, if left unaddressed, prolonged exposure to moisture can weaken structural integrity and compromise insulation properties. This can lead to increased energy costs and potential long-term structural issues.

To prevent or mitigate these problems caused by perimeter caulking failure and subsequent water infiltration, it is crucial to regularly inspect windows for any signs of deteriorating caulking or gaps. Promptly addressing these issues by resealing or replacing caulking will help maintain a watertight seal around windows and prevent future damage.

In conclusion, understanding the potential consequences of window leaks due to perimeter caulking failure is essential in order to take appropriate measures for prevention and remediation. Regular maintenance and timely repairs are key in preserving both the aesthetic appeal and structural integrity of interior wall surfaces.